| 2005 Yamaha Sleds: | ||||||||||||||||||||||||
| Models | 05 RX1& RX1-ER | 05 Warrior | 05 RS Vector | 05 RS Rage | 05 600 Venom & Venom ER | 05 700 SXViper MTN | 05 RX1MTN | 05 RS Vector MTN | 05 RS Venture | 05 Venture 600 | 05 Venture 700 | 05 VK540III | ||||||||||||
| Engine (cyl) | 998 (4) | 998 (4) | 973 (3) | 973 (3) | 593 (3) | 696 (3) | 998 (4) | 973 (3) | 973 (3) | 593 (3) | 696 (3) | 353 (2) | ||||||||||||
| Carburetor | ||||||||||||||||||||||||
| Type | Mikuni BSR37x 4 | Mikuni BSR37x 4 | Keihin CVK 40x33 | Keihin CVK 40x33 | Mikuni TM31x 3 | Mikuni TM33x 3 | Mikuni BSR37x 4 | Keihin CVK 40x3 | Keihin CVK 40x3 | Mikuni TM31x 3 | Mikuni TM33x 3 | Mikuni B38-34 | ||||||||||||
| Main Jet | 135 | 135 | 148 | 148 | 1-136.8, 2/3-133.8 | 156.3 | 135 | 148 | 148 | 1-136.8, 2/3-133.8 | 156.3 | 141.3 | ||||||||||||
| Clip Position | 3 | 3 | NA | NA | 3 | 3 | 3 | NA | NA | 3 | 3 | na | ||||||||||||
| Pilot Jet | 17.5 | 17.5 | 45 | 45 | 42.5 | 45 | 17.5 | 45 | 45 | 42.5 | 45 | 90 | ||||||||||||
| Float Height (mm) | 13 +/- 2 | 13 +/- 2 | 16 | 16 | 13.3+/- 2 | 13.3+/- 2 | 13 +/- 2 | 16 | 16 | 13.3+/- 2 | 13.3+/- 2 | 14+/- 2 | ||||||||||||
| Fuel Screws | 2 | 2 | 2 | 2 | 2 | 1 7/8 | 2 | 2 | 2 | 2 | 1 7/8 | 1 1/4 | ||||||||||||
| Pilot Air Jet | 85/120 | 85/120 | 120 | 120 | 1 | 1 | 85/125/120 | 120 | 120 | 1 | 1 | 0.8 | ||||||||||||
| Idle RPM | 1350 +/- 100 | 1350 +/- 100 | 1400 +/- 100 | 1400 +/- 100 | 1400 +/- 100 | 1800 +/- 100 | 1350 +/- 100 | 1400 +/- 100 | 1400 +/- 100 | 1600 +/- 100 | 1800 +/- 100 | 1200 +/- 100 | ||||||||||||
| Drive | ||||||||||||||||||||||||
| Engagement RPM | 3600 | 3600 | 3500 | 3600 | 4300 | 3900 | 3600 | 4000 | 3200 | 4100 | 3900 | 2600 | ||||||||||||
| Shift RPM | 10250 | 10250 | 8500 | 8500 | 8500 | 8400 | 10250 | 8500 | 8500 | 8500 | 8400 | 6700 | ||||||||||||
| Belt Type | 8DN | 8DN | 8DN | 8DN | 8DN | 8DN | 8DN | 8DN | 8DN | 8DN | 8DN | 87X | ||||||||||||
| Sheave Ctr to Ctr | 268.5 mm | 268.5 mm | 268.5 mm | 268.5 mm | 268.5 mm | 268.5 mm | 268.5 mm | 268.5 mm | 268.5 mm | 268.5 mm | 268.5 mm | 268.5 mm | ||||||||||||
| Sheave Offset | 15 mm | 15 mm | 15 mm | 15 mm | 15 mm & 20 mm ER | 15 mm | 15 mm | 15 mm | 15 mm | 20 mm | 15 mm & 20 mm ER | 13.5 mm | ||||||||||||
| Clutch Weights (rivets) | 8fa-00 w/17.2 w/ hole & 17.2 | 8fa-00 w/17.2 w/ hole & 17.2 | 8es/13.9 & 13.9 | 8es/17.2 & 13.9 | 8dg/13.3al & 13.9 | 8dn-10/none & 13.3 | 8bu-10/10.3 both holes | 8bu-10/alum 10.3 | 8es/13.9 & 17.2 | 8ch/13.9 & 13.3 | 8ek/17.2 & 17.2 | 8at-00 w/13.3 | ||||||||||||
| Roller Type | 15.6mm | 15.6mm | 15.6mm | 15.6mm | 15.6mm | 15.6mm | 14.5mm | 16mm | 15mm | 14.5mm | 15.6mm | 15.6mm | ||||||||||||
| Primary Spring | Y-S-Y | Y-S-Y | Y-S-Y | B-G-B | G-G-G | G-W-G | O-P-O | G-W-G | W-S-W | O-S-O | B-P-B | S-B-S | ||||||||||||
| Secondary Spring | Pink | White | Pink | Pink | Red | Green | White | Pink | Pink | Green | Green | White | ||||||||||||
| Secondary Setting | 60deg | 60deg | 60 deg | 60 deg | 80 deg | 70 deg | 70deg | 60 deg | 60 deg | 70 deg | 70 deg | 40 deg | ||||||||||||
| Helix Angle | 51/43 deg | 51/43 deg | 43 deg | 43 deg | 47 deg | 45deg | 45 deg | 39 deg | 41 deg | 43 deg | 45 deg | 37 deg | ||||||||||||
| Gearing | 24/38 | 23/38 | 22/38 | 22/39 | 20/39 | 21/40 | 21/40 | 20/40 | 22/39 | 20/39 | 22/39 | 17/39 | ||||||||||||
| Chain | 70L | 70L | 68L | 70L | 68L | 70L | 70L | 68L | 70L | 68L | 70L | 70L | ||||||||||||