Simple Specs:
See Bottom of the Screen for General Torque Spec.
Torque Specs:
SRX/Viper Style Heads: 20 ft lbs
SRX/Viper Cyls: 24 ft lbs
Water Rail: 7.2 ft lbs
Reeds: 10 ft lbs
Case bolts: 19 ft lbs
Magneto: 61 ft lbs
SX/Vmax Style TriplesHeads: 17 ft lbs
SX/VmaxTwin Style Heads: 16 ft lbs
SX/Vmax Cyl: 24 ft lbs
Reeds: 10 ftlbs
Case Bolts: 19 ft lbs
Magneto: 61 ft lbs
Exciter Specs:
14mm bolts are 24 ft/lbs, the 12mm bolts are 20ft/lbs on the
cylinders and
heads,
Clutch Alignment:
Center to Center is 268.5mm
15 mm Offset on 97 & up and 20 mm on Electric start.
Offset on the clutches are 11mm on 1987 thru 1990 and 13mm on
exciters after 1990.
GENERAL TIGHTENING TORQUE SPECIFICATIONS
This chart specifies tightening torques for standard fasteners with a standard
ISO thread pitch. Tightening torque specifications for special components or
assemblies are provided for each chapter of this manual.
To avoid warpage, tighten multi-fastener assemblies in a crisscross pattern and
progressive stages until the specified tightening torque is reached.
Unless otherwise specified, tightening torque specifications require clean, dry
threads. Components should be at room temperature.
General Torque | ||||
A | B | Specifications | ||
(nut) | (bolt) | Nm | m-kg | ft-Ib) |
10 mm | 6mm | 6 | 0.6 | 4.3 |
12 mm | 8mm | 15 | 1.5 | 11 |
14 mm | 10 mm | 30 | 3.0 | 22 |
17 mm | 12 mm | 55 | 5.5 | 40 |
19 mm | 14 mm | 85 | 8.5 | 61 |
22 mm | 16 mm | 130 | 13.0 | 94 |
A: Distance between flats B: Outside thread diameter
Totallyamaha is not responsible for any damages that these modifications may cause to your vehicle; any modifications are your responsibility if you choose to do so. We are providing information ONLY. Some of these modifications may VOID your warranty and that is your responsibility to look into. The Totallyamaha users have passed along most of the information found on this site. If you have any questions or concerns about anything on this site talk to your dealer before using any of the information. Totallyamaha will not be liable for any damages or personal injury from any modification performed from this site.