Yamaha Pro-Action Front end kit

Below you will find the installation instruction from AD Boivin and Pics of the kit installed on a SX700R. This kit works pretty well in hard cornering but the ski will still lift some. I think a set of straight rate springs would have helped more. Once this kit is installed be very careful with small rocks or parts of the trail that can grab the lower rod, because of the lower mount. If you want to run these brackets on the older pro-actions  sled with short spindles and you have C&A skis, the ski will have to be notched to allow full movement. The Vipers and the Newer pro-action sled have longer spindles allowing more room for the lower radius rods on any type of ski.

Totallyamaha is not responsible for any damages that these modifications may cause to your vehicle; any modifications are your responsibility if you choose to do so. We are providing information ONLY. Some of these modifications may VOID your warranty and that is your responsibility to look into. The Totallyamaha users have passed along most of the information found on this site. If you have any questions or concerns about anything on this site talk to your dealer before using any of the information. Totallyamaha will not be liable for any damages or personal injury from any modification performed from this site.